Ok ill be honest with u im not the best guy to ask about batracer but ill tell u what i no
everyone that can get on to this part of batracer is probably exprienced enough to no how to start a game and join one so ill skip that bit
when u first look at the engineers report u will see many different words to say the same thing
hard } high } all these should be put at 75 stiff }
and medium 50
soft } low }these should be put at 25
with the brake bias it is a bit different if it is
safe put the slider to 40, if loose put it to 60 medium still 50
when u press test some of theslider will say either increase or decrease setting , u should put it up or down by 8 as it is a more effencient way of gettting to the spot on bit keep going up or down in eights till the slider shows that it is inbetween the last two points then put the number in the middle and test again put in the number in the middle . this is again, test and carry on doing this till it says spot on this is quite hard to explain so if ur not sure plz pm me :)
after this u will need to determine how fast you would like to take it with the experimintation bar at the top of the page if u have charisma u will be able to put this at 100 if not keep around 70
the fuel margin is new to batracer if i were u i would keep it 10 laps less than the race distance (e.g 78 lap race 68 fuel margin)this is only an opinion and if a more reliable source found please pm me
what else oh yes kers i always put on gives speed boost so why not
anything else just pm my username stu909
Document created by Stuart Wright. Last updated 1 Aug 2013.